Carbide Inserts for Engineering
As a new ultra-hard product, PDC cutter and cutting tool have been used in many industrial sectors, especially in oil & mine drilling. Shareate has the most advanced technique of material design, mould design and manufacturing. Carbide substrates with various interface shapes significantly reduce the internal stress in PDC cutter manufacturing process, which makes combination in excellent abrasion resistance of diamond with high impact resistance of carbide.
- Carbide Inserts for Engineering
| Grade |
Cobalt Content %(±0.5) |
Density g/cm³(±0.1) |
Hardness HRA(±0.3) |
Bending Strength N/mm²(≥) |
Application Introduction |
|---|---|---|---|---|---|
| JZ10C | 10 | 14.55 | 87.8 | 2850 | With good wear resistance and applied to the roller cutter and disk cutter inserts used in medium‑hard rock formations. |
| XR11C | 11 | 14.45 | 87.0 | 2800 | Applied to the roller cutter and disk cutter inserts used in medium‑hard rock formations. |
| XR13C | 13 | 14.25 | 86.5 | 2800 | With good toughness and applied to the roller cutter and disk cutter inserts used in hard rock formations |
| JZ16 | 16 | 13.95 | 86.5 | 2950 | With good toughness and applied to the roller cutter inserts used in medium hard to hard rock formations |
| JZ16C | 16 | 13.95 | 85.5 | 2850 | With excellent impact resistance and applied to the roller inserts used in hard to extremely hard rock formations with high compressive strength. |
★ The customized specification is available.
◎ AIRFOIL INSERT
The unique insert design is used to increase the drilling speed in engineering operations and break rocks through cutting and chiseling. It is suitable for medium soft rock formations.
| Model | Basic size (mm) | Model | Basic size (mm) | ||
|---|---|---|---|---|---|
| D | H | D | H | ||
| X1625 | 16.0 | 25.0 | X2235 | 22.0 | 35.0 |
| X1826 | 18.0 | 26.0 | X2240 | 22.0 | 40.0 |
| X2030 | 20.0 | 30.0 | X2437 | 24.1 | 37.0 |
★ The customized specification is available.
◎ WEDGED INSERT
It breaks rock by cutting and chiseling, suitable for soft rock formations with high drilling speed and low insert breakage rate.
| Model | Basic size (mm) | Model | Basic size (mm) | ||||
|---|---|---|---|---|---|---|---|
| D | H | h | D | H | h | ||
| X1015 | 10.0 | 15.0 | 6.2 | X1620 | 16.4 | 20.0 | 7.6 |
| X1114 | 11.6 | 14.0 | 7.5 | X1828 | 18.5 | 28.0 | 13.3 |
| X1217 | 12.2 | 17.0 | 6.0 | X2032 | 20.6 | 32.0 | 15.5 |
| X1218 | 12.5 | 18.0 | 7.3 | X2838 | 28.6 | 38.0 | 15.4 |
| X1421 | 14.4 | 21.0 | 8.1 | X3040 | 30.5 | 40.0 | 16.3 |
★ The customized specification is available.
- Carbide Inserts for Shield TBM
It has the characteristics of high strength, wear resistance, and so on.
| Grade |
Cobalt Content %(±0.5) |
Density g/cm³(±0.1) |
Hardness HRA(±0.3) |
Bending Strength N/mm²(≥) |
Application Introduction |
|---|---|---|---|---|---|
| JZ10C | 10 | 14.55 | 87.8 | 2850 | With good wear resistance and applied to the shield tips used for medium‑hard formations. |
| JZ12C | 12 | 14.33 | 86.6 | 2800 | With good toughness and thermal fatigue resistance for shield tips used in complex formation. |
| JZ14 | 14 | 14.15 | 87.0 | 2850 | Used For medium to hard formation shield tips. |
★ The customized specification is available.
◎ MASTER INSERTS
| Model | L | I | H |
|---|---|---|---|
| DKY050040025 | 50 | 25 | 40 |
| DKY060042028 | 60 | 28 | 42 |
★ The customized specification is available.
◎ PAIRED INSERTS
| Model | L | I | H |
|---|---|---|---|
| DKY040035022 | 40 | 21.7 | 35 |
| DKY045040025 | 45 | 24.5 | 40 |
★ The customized specification is available.
◎ LONG INSERTS
| Model | L | I | H |
|---|---|---|---|
| DKY093016010 | 93 | 10 | 16 |
| DKY073016010 | 73 | 10 | 16 |
★ The customized specification is available.